Time and Event Sync all PCs - Revision history

Behrooz at 08:59, 2 October 2019

2019-10-02T08:59:19Z

← Older revision		Revision as of 08:59, 2 October 2019
Line 1:		Line 1:
	This applies to MXWendler version 4.2 and above		This applies to all different OS and MXWendler version 4.2 and above

	'''Task'''		'''Task'''

Behrooz at 08:58, 2 October 2019

2019-10-02T08:58:34Z

← Older revision		Revision as of 08:58, 2 October 2019
Line 25:		Line 25:

	Important: sometimes Windows 7 does not allow broadcasting, then address the other machine with its IP directly ( eg. 192.168.1.23 instead of 192.168.1.255 ).		Important: sometimes Windows 7 does not allow broadcasting, then address the other machine with its IP directly ( eg. 192.168.1.23 instead of 192.168.1.255 ).

			For more information on time and event syncing PCs check 'Tutorial Time-sync and sending IO Commands over OSC Protocol'.

Behrooz at 11:16, 1 October 2019

2019-10-01T11:16:39Z

← Older revision		Revision as of 11:16, 1 October 2019
Line 3:		Line 3:
	'''Task'''		'''Task'''

	Pooling MXWendler systems via time ~~synchronisation~~.		Pooling MXWendler systems via time synchronization.

	'''Tests to do before starting MXWendler'''		'''Tests to do before starting MXWendler'''
	:Can you ping all the computers from one host?		:*Can you ping all the computers from one host?
	:Can you ping back?		:*Can you ping back?
	:Does your router/switch allow broadcasting?		:*Does your router/switch allow broadcasting?
	:Are the firewalls turned off?		:*Are the firewalls turned off?
	:Does the admin account have a password ( Windows 7)?		:*Does the admin account have a password ( Windows 7)?

	'''Solution'''		'''Solution'''

	1. Turn on ~~osc~~ receiving for '''every''' machine on port 7000.		1. Turn on OSC receiving for '''every''' machine on port 7000.

	2. Create a simple ~~osc~~ testing application with eg. pd and send some commands to any machine from any machine.		2. Create a simple OSC testing application with eg. PD and send some commands to any machine from any machine.

	3. Turn on ''Broadcast and receive time'' for '''every''' machine. all machines will send ~~there~~ time until they receive packet from a machine with lower ip, then they switch to receiving.		3. Turn on 'Broadcast and receive time' for '''every''' machine. all machines will send their time until they receive a packet from a machine with the lower IP, then they switch to receiving.

	4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP ).		4. Broadcast to the subnet: 192.168.1.255 ( subnet may have a different IP ).

	5. Broadcast to the ports where the machines are listening ( 7000 ).		5. Broadcast to the ports where the machines are listening ( 7000 ).

	Important: sometimes Windows 7 does not allow broadcasting, then ~~adress~~ the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 ).		Important: sometimes Windows 7 does not allow broadcasting, then address the other machine with its IP directly ( eg. 192.168.1.23 instead of 192.168.1.255 ).

Behrooz at 13:51, 5 June 2019

2019-06-05T13:51:17Z

← Older revision		Revision as of 13:51, 5 June 2019
Line 3:		Line 3:
	'''Task'''		'''Task'''

	Pooling MXWendler systems via time synchronisation		Pooling MXWendler systems via time synchronisation.

	'''Tests to do before starting MXWendler'''		'''Tests to do before starting MXWendler'''

Behrooz at 13:51, 5 June 2019

2019-06-05T13:51:03Z

← Older revision		Revision as of 13:51, 5 June 2019
Line 1:		Line 1:
	~~'''~~This applies to MXWendler version 4.2 and above~~'''~~		This applies to MXWendler version 4.2 and above

	'''Task'''		'''Task'''

Behrooz at 13:19, 5 June 2019

2019-06-05T13:19:53Z

← Older revision		Revision as of 13:19, 5 June 2019
Line 10:		Line 10:
	:Does your router/switch allow broadcasting?		:Does your router/switch allow broadcasting?
	:Are the firewalls turned off?		:Are the firewalls turned off?
	:Does the admin account have a password ( Windows 7)		:Does the admin account have a password ( Windows 7)?

	'''Solution'''		'''Solution'''

	1. Turn on osc receiving for '''every''' machine on port 7000		1. Turn on osc receiving for '''every''' machine on port 7000.

	2. Create a simple osc testing application with eg. pd and send some commands to any machine from any machine		2. Create a simple osc testing application with eg. pd and send some commands to any machine from any machine.

	3. Turn on ''Broadcast and receive time'' for '''every''' machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving.		3. Turn on ''Broadcast and receive time'' for '''every''' machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving.

	4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP )		4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP ).

	5. Broadcast to the ports where the machines are listening ( 7000 )		5. Broadcast to the ports where the machines are listening ( 7000 ).

	Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 )		Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 ).

Behrooz at 14:34, 27 March 2019

2019-03-27T14:34:33Z

← Older revision		Revision as of 14:34, 27 March 2019
Line 1:		Line 1:
	'''This applies to MXWendler version 4.2 and above'''		'''This applies to MXWendler version 4.2 and above'''

	''Task:''		'''Task'''
	~~:Pooling MXWendler systems via time synchronisation~~

			Pooling MXWendler systems via time synchronisation

	''Tests to do before starting MXWendler:''		'''Tests to do before starting MXWendler'''
	:Can you ping all the computers from one host?		:Can you ping all the computers from one host?
	:Can you ping back?		:Can you ping back?
Line 12:		Line 12:
	:Does the admin account have a password ( Windows 7)		:Does the admin account have a password ( Windows 7)

			'''Solution'''
	''Solution:''

	1. Turn on osc receiving for '''every''' machine on port 7000		1. Turn on osc receiving for '''every''' machine on port 7000

Behrooz at 14:33, 27 March 2019

2019-03-27T14:33:33Z

← Older revision		Revision as of 14:33, 27 March 2019
Line 14:		Line 14:

	''Solution:''		''Solution:''
	~~:Turn on osc receiving for '''every''' machine on port 7000~~

	~~:Create a simple~~ osc ~~testing application with eg. pd and send some commands to any machine from any~~ machine		1. Turn on osc receiving for '''every''' machine on port 7000

	~~:Turn on ''Broadcast~~ and ~~receive time'' for '''every'''~~ machine~~. all machines will send there time until they receive packet~~ from a machine ~~with lower ip, then they switch to receiving.~~		2. Create a simple osc testing application with eg. pd and send some commands to any machine from any machine

	:Broadcast to ~~the subnet: 192.168.1~~.~~255 ( subnet may have different IP )~~		3. Turn on ''Broadcast and receive time'' for '''every''' machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving.

	:Broadcast to the ~~ports where the machines are listening~~ ( ~~7000~~ )		4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP )

	:Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 )		5. Broadcast to the ports where the machines are listening ( 7000 )

			Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 )

Behrooz: Created page with "'''This applies to MXWendler version 4.2 and above''' ''Task:'' :Pooling MXWendler systems via time synchronisation ''Tests to do before starting MXWendler:'' :Can you pin..."

2019-03-18T16:48:12Z

Created page with "'''This applies to MXWendler version 4.2 and above''' ''Task:'' :Pooling MXWendler systems via time synchronisation ''Tests to do before starting MXWendler:'' :Can you pin..."

New page

'''This applies to MXWendler version 4.2 and above'''

''Task:''
:Pooling MXWendler systems via time synchronisation

''Tests to do before starting MXWendler:''
:Can you ping all the computers from one host?
:Can you ping back?
:Does your router/switch allow broadcasting?
:Are the firewalls turned off?
:Does the admin account have a password ( Windows 7)

''Solution:''
:Turn on osc receiving for '''every''' machine on port 7000

:Create a simple osc testing application with eg. pd and send some commands to *any machine* from *any machine*

:Turn on ''Broadcast and receive time'' for '''every''' machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving.

:Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP )

:Broadcast to the ports where the machines are listening ( 7000 )

:Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 )