Linux and No Dongle Detection: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
'''Solution''' | '''Solution''' | ||
Enable the correct permissions for the USB dongle with the following command sequence issued in a | Enable the correct permissions for the USB dongle. Enable full access to the dongles with the following command sequence issued in a terminal: | ||
<code> | <code> | ||
$ sudo touch /etc/udev/rules.d/999-ft-mxw.rules | $ sudo touch /etc/udev/rules.d/999-ft-mxw.rules | ||
$ sudo | $ sudo vim /etc/udev/rules.d/999-ft-mxw.rules | ||
</code> | |||
Enter this line: | |||
<code> | |||
SUBSYSTEM=="usb",ATTRS{idVendor}=="096e",MODE="0666" | |||
</code> | |||
Then restart udev service | |||
<code> | |||
$ sudo /etc/init.d/udev restart | $ sudo /etc/init.d/udev restart | ||
</code> | </code> | ||
and re-plug the dongle. | |||
Revision as of 14:29, 31 May 2024
This applies to Ubuntu and Ubuntu-based Linux versions and all MXWendler versions
Problem
You start with a USB dongle attached but the log states there is no dongle found.
Background
Actually a dongle is found, but it cannot be read because of a udev permission issue
Solution
Enable the correct permissions for the USB dongle. Enable full access to the dongles with the following command sequence issued in a terminal:
$ sudo touch /etc/udev/rules.d/999-ft-mxw.rules
$ sudo vim /etc/udev/rules.d/999-ft-mxw.rules
Enter this line:
SUBSYSTEM=="usb",ATTRS{idVendor}=="096e",MODE="0666"
Then restart udev service
$ sudo /etc/init.d/udev restart
and re-plug the dongle.