Capture Cards (e.g. BM Decklink Studio2): Difference between revisions

From MXWendler Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 25: Line 25:
[[File:LiveMedia_LiveEditor.png|480px]]
[[File:LiveMedia_LiveEditor.png|480px]]


[[File:LiveMedia_LiveEditor_captur.png|640px]]
[[File:LiveMedia_LiveEditor_captur.png|728px]]




Line 31: Line 31:


:Setup your Capture Card in Control Panel "BlackmagicDesign Control Panel"
:Setup your Capture Card in Control Panel "BlackmagicDesign Control Panel"
:[[File:BM_System_Settings.PNG|480px]]


:Check in Blackmagic Media Express if there is a signal
:Check in Blackmagic Media Express if there is a signal
Line 40: Line 36:
:In the Stage Designer live media window, DO NOT use the Blackmagic WDM device, use the Decklink device: '''WDM->unknown''', '''Decklink->known''' with the exact figures you noted before
:In the Stage Designer live media window, DO NOT use the Blackmagic WDM device, use the Decklink device: '''WDM->unknown''', '''Decklink->known''' with the exact figures you noted before
:Reduce latency: set Stage Designer / FXServer framerate ''higher'' than capture card latency
:Reduce latency: set Stage Designer / FXServer framerate ''higher'' than capture card latency
[[File:BM_System_Settings.PNG|480px]]

Revision as of 17:40, 18 March 2019

This applies to Mac OS 10.7 and MXWendler version 4.2 and above (Windows see below)

Problem:

You can find your Capture Cards in Live Devices, but there is no video signal.

Solution:

Open "Live Devices" from "Settings/Media-Pictures, video and live media"
Mark the Checkbox "Open Live Device Settings on Start"

File:LiveDevices.png

Change state of your Live device by double-clicking
Set state to known and enter your Capture values

Now a Video dialog should appear with a preview of your live device

File:Video LiveDevice dialog.png

Start FXServer/StageDesigner
Open New Clip in Live Editor
Select LiveMedia in DropDown Menu

File:LiveMedia LiveEditor.png

File:LiveMedia LiveEditor captur.png


Using BlackmagicDesign Capture Cards with Windows 7

Setup your Capture Card in Control Panel "BlackmagicDesign Control Panel"
Check in Blackmagic Media Express if there is a signal
If there is a signal in Black Magic Media Express, write down the exact figures eg. 1920 x 1080 x 50p
In the Stage Designer live media window, DO NOT use the Blackmagic WDM device, use the Decklink device: WDM->unknown, Decklink->known with the exact figures you noted before
Reduce latency: set Stage Designer / FXServer framerate higher than capture card latency


File:BM System Settings.PNG