Time and Event Sync all PCs: Difference between revisions
(Created page with "'''This applies to MXWendler version 4.2 and above''' ''Task:'' :Pooling MXWendler systems via time synchronisation ''Tests to do before starting MXWendler:'' :Can you pin...") |
No edit summary |
||
| Line 14: | Line 14: | ||
''Solution:'' | ''Solution:'' | ||
1. Turn on osc receiving for '''every''' machine on port 7000 | |||
2. Create a simple osc testing application with eg. pd and send some commands to *any machine* from *any machine* | |||
3. Turn on ''Broadcast and receive time'' for '''every''' machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving. | |||
4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP ) | |||
5. Broadcast to the ports where the machines are listening ( 7000 ) | |||
Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 ) | |||
Revision as of 16:33, 27 March 2019
This applies to MXWendler version 4.2 and above
Task:
- Pooling MXWendler systems via time synchronisation
Tests to do before starting MXWendler:
- Can you ping all the computers from one host?
- Can you ping back?
- Does your router/switch allow broadcasting?
- Are the firewalls turned off?
- Does the admin account have a password ( Windows 7)
Solution:
1. Turn on osc receiving for every machine on port 7000
2. Create a simple osc testing application with eg. pd and send some commands to *any machine* from *any machine*
3. Turn on Broadcast and receive time for every machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving.
4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP )
5. Broadcast to the ports where the machines are listening ( 7000 )
Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 )