Difference between revisions of "Triggering Effects with TUIO"

From MXWendler Wiki
Jump to navigation Jump to search
Line 30: Line 30:
 
Once the network setup is up and running, you can connect the TUIO command stream to an IO Event of your choice. To connect the first markers X position to the active layers X position, configure the following:
 
Once the network setup is up and running, you can connect the TUIO command stream to an IO Event of your choice. To connect the first markers X position to the active layers X position, configure the following:
  
:'''(F)''' Open Open DMX/MIDI/Keyboard Events in the IO Devices Settings:
+
9. Open Open DMX/MIDI/Keyboard Events in the IO Devices Settings: '''(F)'''
::'''Menu: Settings → IO Devices → DMX/MIDI/Keyboard Events'''
+
:'''Menu: Settings → IO Devices → DMX/MIDI/Keyboard Events'''
 +
10. Choose 'Tuio events' as Trigger. '''(G)'''
  
:'''(G)''' Choose 'Tuio events' as Trigger.
+
11. Create a new event with the '+' button. '''(H)'''
  
:'''(H)''' Create a new event with the '+' button.
+
12. Choose '2Dcur_Tap00_x' as event. '''(I)'''
  
:'''(I)''' Choose '2Dcur_Tap00_x' as event.
+
13. Choose '/mxw/track/active/layer/active/translationx' as receiver. '''(J)'''
  
:'''(J)''' Choose '/mxw/track/active/layer/active/translationx' as receiver.
+
14. Choose 'Pass value' as event type. '''(K)'''
  
:'''(K)''' Choose 'Pass value' as event type.
+
15. Confirm with 'Apply'. '''(L)'''
 
 
:'''(L)''' Confirm with 'Apply'.
 
  
  
 
[[File:TUIO_3.png|728px]]
 
[[File:TUIO_3.png|728px]]

Revision as of 15:31, 27 March 2019

TUIO is a protocol intended to connect multitouch environments such us laser scanners, multitouch tables etc. to interactive installations. It is based on OSC, which itself is the network-based successor to MIDI. Today, many common devices can send TUIO, including IPhones, IPads, Android devices, Kinect Controllers, Wii Controllers and many more.

Using TUIO in your setup is easy. We will use an Android phone for the example setup.

1. First connect the MXWENDLER server and the Android device over a network, e.g. WLAN.

2. Open 'OSC' in the MXWENDLER IO Devices Settings: (A)

Menu: Settings → IO Devices → OSC

3. Activate 'Receive OSC' (B)

4. Set 'Listen on Port' to '7000' (default). (C)

5. Turn on 'Log received Data' (reset later for better performance). (D)


TUIO 1.png


6. Start up the TUIO App, e.g. TUIOdroid, and change the TUIO port from ‘3333’ to ‘7000’.

7. Start panning on the Android device.

8. Check successful connection in the log window. (E)

Menu: Settings → Error and log window


TUIO 2.png


Once the network setup is up and running, you can connect the TUIO command stream to an IO Event of your choice. To connect the first markers X position to the active layers X position, configure the following:

9. Open Open DMX/MIDI/Keyboard Events in the IO Devices Settings: (F)

Menu: Settings → IO Devices → DMX/MIDI/Keyboard Events

10. Choose 'Tuio events' as Trigger. (G)

11. Create a new event with the '+' button. (H)

12. Choose '2Dcur_Tap00_x' as event. (I)

13. Choose '/mxw/track/active/layer/active/translationx' as receiver. (J)

14. Choose 'Pass value' as event type. (K)

15. Confirm with 'Apply'. (L)


TUIO 3.png