Tutorial Connecting the grandMA 2Port Node with MXWendler via Art-Net: Difference between revisions

From MXWendler Wiki
Jump to navigation Jump to search
(Created page with "In this tutorial we will connect a grandMA onPC software with a grandMA 2Port node. The onPC software will send Art-Net, which which will be used to control a MXWendler medias...")
 
No edit summary
Line 5: Line 5:




[[File:04 IPConsole.PNG]]
[[File:04 IPConsole.PNG|300px]]
:'''01.''' Open the network adapter settings
:'''01.''' Open the network adapter settings



Revision as of 17:37, 23 November 2015

In this tutorial we will connect a grandMA onPC software with a grandMA 2Port node. The onPC software will send Art-Net, which which will be used to control a MXWendler mediaserver.


Configure the grandMA onPC PC system

File:04 IPConsole.PNG

01. Open the network adapter settings


File:05 IPConsoleExtended.PNG

02. Open 'Erweitert...' / 'Extended...'


03. Add a second IP adress in the Art-Net range. The netmask of 255.0.0.0 is important.


Configure the grandMA onPC software

File:01 grandMAsession.PNG

04. Open MA Setup, create a new session


05. Open DMX nodes, add the node, set Ma-Net2 mode, set session id that matches the previously created session.


06. Open Network Protocols, enable Art-Net, enable DMX output, set universe and subnet as shown.


Configure the MXWendler Mediaserver PC system

File:07 IPMediaserver.PNG

07. Open network adapter settings, enter a valid Art-Net IP adress. The subnet mask of 255.0.0.0 is important.


Configure the MXWendler Mediaserver software

08. Open Settings → IO → Art-Net/DMX → Select adapter, universe and subnet as shown.