Tutorial Connecting the grandMA 2Port Node with MXWendler via Art-Net: Difference between revisions

From MXWendler Wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 6: Line 6:


[[File:04 IPConsole.PNG|300px]]
[[File:04 IPConsole.PNG|300px]]
:'''01.''' Open the network adapter settings, give system a MA-Net2 IP adress ( here 192.168.4.254 )
:'''01.''' Open the network adapter settings, assign interface a primary MA-Net2 IP adress ( here 192.168.4.254 )




Line 14: Line 14:


[[File:06 IPConsoleXtended2.PNG|300px]]
[[File:06 IPConsoleXtended2.PNG|300px]]
:'''03.''' Add a second IP adress in the Art-Net range. The netmask of 255.0.0.0 is important.
:'''03.''' Add a secondary interface IP adress in the Art-Net range ( recommended 2.x.x.x ). The netmask of 255.0.0.0 is important.





Revision as of 16:53, 24 November 2015

In this tutorial we will connect a grandMA onPC software with a grandMA 2Port node. The onPC software will send Art-Net, which which will be used to control a MXWendler mediaserver.


Configure the grandMA onPC PC system

File:04 IPConsole.PNG

01. Open the network adapter settings, assign interface a primary MA-Net2 IP adress ( here 192.168.4.254 )


File:05 IPConsoleExtended.PNG

02. Open 'Erweitert...' / 'Extended...'


03. Add a secondary interface IP adress in the Art-Net range ( recommended 2.x.x.x ). The netmask of 255.0.0.0 is important.


Configure the grandMA onPC software

04. Open MA Setup, create a new session on the MA-Net2 IP ( here 192.168.4.254 )


05. Open DMX nodes, add the node, assign it a MA-Net2 IP adress ( here 192.168.4.250 ), set Ma-Net2 mode, set session id that matches the previously created session.


06. Open Network Protocols, enable Art-Net, enable DMX output, set universe and subnet as shown.


Configure the MXWendler Mediaserver PC system

File:07 IPMediaserver.PNG

07. Open network adapter settings, enter a valid Art-Net IP adress. The subnet mask of 255.0.0.0 is important.


Configure the MXWendler Mediaserver software

08. Open Settings → IO → Art-Net/DMX → Select adapter, universe and subnet as shown.