Tutorial Connecting the grandMA 2Port Node with MXWendler via Art-Net

From MXWendler Wiki
Revision as of 18:35, 23 November 2015 by Admin (talk | contribs) (Created page with "In this tutorial we will connect a grandMA onPC software with a grandMA 2Port node. The onPC software will send Art-Net, which which will be used to control a MXWendler medias...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

In this tutorial we will connect a grandMA onPC software with a grandMA 2Port node. The onPC software will send Art-Net, which which will be used to control a MXWendler mediaserver.


Configure the grandMA onPC PC system

File:04 IPConsole.PNG

01. Open the network adapter settings


File:05 IPConsoleExtended.PNG

02. Open 'Erweitert...' / 'Extended...'


03. Add a second IP adress in the Art-Net range. The netmask of 255.0.0.0 is important.


Configure the grandMA onPC software

File:01 grandMAsession.PNG

04. Open MA Setup, create a new session


05. Open DMX nodes, add the node, set Ma-Net2 mode, set session id that matches the previously created session.


06. Open Network Protocols, enable Art-Net, enable DMX output, set universe and subnet as shown.


Configure the MXWendler Mediaserver PC system

File:07 IPMediaserver.PNG

07. Open network adapter settings, enter a valid Art-Net IP adress. The subnet mask of 255.0.0.0 is important.


Configure the MXWendler Mediaserver software

08. Open Settings → IO → Art-Net/DMX → Select adapter, universe and subnet as shown.
Retrieved from "https://wiki.mxwendler.net/index.php?title=Tutorial_Connecting_the_grandMA_2Port_Node_with_MXWendler_via_Art-Net&oldid=1075"