Tutorial Creating Predefined Layer Position

From MXWendler Wiki
Revision as of 16:49, 22 September 2020 by Behrooz (talk | contribs)
Jump to navigation Jump to search

This tutorial applies to all different OS and MXWendler versions.


The Predefined Layer Positions are settings that can be retrieved directly under the layer transformations.
They allow to set a layer in a specific portion of the output with just one click.
For this tutorial, we are going to use a standard UHD Output (3840x2160) as an example and create
four custom Predefined Layer Position (FHD) as if the outputs were splitted in four FHD projectors.


1. Go to: Menu → Settings → Windows-Misc (A) and select the Layers tab (B)

2. on the top right side of the settings window there is Predefined Positions Box

728px {{#mpdftags: pagebreak}}

3. the values in this box are pixel positions, offsets inside the rendering area: (PosX, PosY, SizeX, SizeY)

728px {{#mpdftags: pagebreak}}

4. to create the first Layer as a FHD in the top left corner of our output we would have to write:

  • 0,0,1920,1080 followed by a short description E.g. /FHD1

5. the other layer position will then be:

  • 1920,0,1920,1080/FHD2
  • 0,1080,1920,1080/FHD3
  • 1920,1080,1920,1080/FHD4

6. To activate the changes, please restart Stage Designer. (r)