Tutorial Eventmaster Toolset Controlling MXWendler by e.g. e2 S3 Image Processor

This tutorial applies to all different OS and MXWendler versions > 6.0.4

Introduction

This tutorial explains how to set up a Barco Eventmaster to trigger and control media playback on StageDesigner or FXServer.

1. Open SD (StageDesigner) and load a clip into preload 1:

2. Open Settings->IO->Barco e2 and activate TCP listening. Also either change or not the port number

3. In the Barco Eventmaster Toolset, create an 'External Device', name it e.g. 'StageDesigner'

4. In the 'Adjust: StageDesigner' tab, set IP address and port number

5. In the 'Adjust: StageDesigner' tab, add a new command. Store the command content, e.g.

More possible commands are in the OSC control section: OSC Reference

6. In the 'Cue' section, add a cue

7. In this 'Cue', add actions

8. From 'External Devices' drop an available command onto the 'Commands' field of the action