Tutorial Optimum Audio Settings with an External Audio Interface: Difference between revisions

From MXWendler Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:


''Tip: It is always better to have an extra file for the audio output for the shows since it gives you more flexibility to tweak and solve possible issues.'' <br>
''Tip: It is always better to have an extra file for the audio output for the shows since it gives you more flexibility to tweak and solve possible issues.'' <br>
''Tip: You can use different sample rates in different situations, but you have to always remember to use the same sample rate both in software and windows settings.''
''Tip: You can use different sample rates in different situations, but for best performance results you have to always remember to use the same sample rate for your output, in software and windows settings.''


== Settings for Audio Interface ==
== Settings for Audio Interface ==

Revision as of 15:40, 20 August 2019

In this tutorial, we will go through the settings needed for an optimal audio playback with MXWendler in Windows.

Files and Formats

All the standard audio file formats and codecs can be played with the software. In order to get the best results, we suggest using the following formats for rendering your audio output (either as an extra audio file or in your video output):

Sample Rate: 48.000 Khz
Bitrate: 320 Kbps or lossless
Bit Depth: 24
Codec: Preferably Aac

Tip: It is always better to have an extra file for the audio output for the shows since it gives you more flexibility to tweak and solve possible issues.
Tip: You can use different sample rates in different situations, but for best performance results you have to always remember to use the same sample rate for your output, in software and windows settings.

Settings for Audio Interface

Normally you can use your external audio interface without any drivers, or with Asio4all drivers, without any issues. But we highly recommend installing the latest Asio drivers provided by the manufacturer of your audio interface.
Usually, the drivers come with their own Asio panels. After installing the drivers, you should find and open the Asio panel of your audio interface and select the following settings:

Sample rate to 48.000Khz
Latency to somewhere around 64ms

{{#mpdftags: pagebreak}}

Settings in Windows

1. Right-click on the Audio sign in Taskbar and select sounds. (Or: Click on Win and type mmsys.cpl and hit enter) (A)

2. Go to Playback Tab and find the right Audio Playback device. (Normally has the name of your audio interface or the model of it)

3. Right-click on it and select 'Enable', 'Set as Default Device' and 'Set as Default Communication Device'. (B)

4. Right-click on it again and select Properties and go to the Advanced tab.

5. Open the drop-down menu from Default Format and select 24bit and 48.000 Khz and click Apply. ('You can do a test if you have signal in the output by clicking on test') (C)

{{#mpdftags: pagebreak}}

Settings in MXWendler

1. Open MXWendler and go to Audio settings

Settings → Input and Output → Audio Devices (A)

2. From the drop-down menu of Device choose the proper output device you're using. (B)

It is always prefered to use the 'Asio' drivers rather than the 'MME' drivers.

3. From the drop-down menu of In-Devices choose the proper output device you're using. (C)

It is always prefered to use the 'Asio' drivers rather than the 'MME' drivers.

4. Set the sample rate to 48000Khz. (D)

5. Click on Reopen and then Ok to close the window. (D)

Audio should be ready to use and you should be able to playback audio files with no trouble.

Tip: If you have dropouts or glitches in the audio, try bringing the latency to a higher value from your audio interface's Asio panel, until the playback works well.