Tutorial Playlists with Images and Keystone Correction: Difference between revisions

From MXWendler Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
This tutorial applies to all different OS and MXWendler versions.
<div class="noprint">
== Introduction==
</div>
In this tutorial, a playlist with images and changing of the keystone is created.
In this tutorial, a playlist with images and changing of the keystone is created.
 
<div class="noprint">
==Steps==
</div>
1. Load the Preload with all the images for the desired playlist. '''(A)'''
1. Load the Preload with all the images for the desired playlist. '''(A)'''



Revision as of 10:05, 25 March 2020

This tutorial applies to all different OS and MXWendler versions.

Introduction

In this tutorial, a playlist with images and changing of the keystone is created.

Steps

1. Load the Preload with all the images for the desired playlist. (A)

2. Open the Playlist Creation Wizard. (B)

3. Set Fade In and Fade Out as desired, in milliseconds. (C)

4. Set Loop Mode from 'Oneshot' to 'Loop'. (D)

5. Set Fade Mode to 'Manual Crossfade'. (E)

Tip: Much like live media, images represent a special case for the Playlist because they have no defined duration. However just like film clips, they are nevertheless given a frame length, meaning that ‘Loop’ mode must be activated in the playlist.

{{#mpdftags: pagebreak}} 6. Open the Playlist Tab. Position and configure the clips. (F)

7. The next image or clip can be played back with the ► Play button, with ►► SkipToNext the after next clip will be played back. The current clip is highlighted orange. (G)

8. Fade In and Fade Out can be set individually for each image in the menu below. (H)


Tip: Images and live media can also be positioned in the Preloads, as well as assigned effects.


{{#mpdftags: pagebreak}} Inserting Keystones

1. Open the Keystone Tab. (A)

2. Open the Keystone Element Tab. To reach this tab a Keystone element has to be activated (the box turns yellow). (B)

3. The number of pivots can be set in the Element Tab. (C)

4. Use the pivots to adjust the output to the desired format. (D)

5. Save the keystone file: (E)

Menu: Keystone → Save Output Correction as..

Tip: A loading process begins when the keystone files are activated. A new file must be loaded to deactivate the loaded keystone file.

{{#mpdftags: pagebreak}} 6. Select and activate in the playlist a row/column for the keystone. (F)

Right-Click into an empty cell → IO Commands → Load a Keystone File

7. Select and load the saved Keystone File: (G)

Double-Click on the top bar in the settings at the bottom of the screen → Open the saved Keystone File

The correspondingly named keystone file will be loaded when the associated cue is activated.

Tip: To delete the entry, open the file-selection dialog and press ‘Escape’.