Tutorial Playlists with OSC Command: Difference between revisions

From MXWendler Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
In this tutorial we are going to send an OSC Command to another device trough the playlist.
This tutorial applies to all different OS and MXWendler versions 6.0 and above.
<div class="noprint">
== Introduction==
</div>
In this tutorial we are going to send an OSC Command to another device through the playlist.
<div class="noprint">
==Steps==
</div>
1. Enable the OSC send from the Settings:
:'''Settings &rarr; Input and Output &rarr; OSC''' '''(A)'''
:Check Send OSC.  '''(B)'''.
:Set the right IP adress and port of the receiving device and confirm by clicking OK. '''(C)'''
2. Go to Playlist.


1. Enable the OSC send:
3. Right-click on an empty cell and go to Input/Output, then select Send OSC '''(D)'''
:'''Settings &rarr; Input and Output &rarr; OSC''' '''(A)''', check Send OSC '''(B)'''.
:Set the right IP adress and port of the receiving device and confirm by clicking ok on the bottom of the settings page.


2. Go to Playlist '''(B)'''
4. The Send OSC settings are at the bottom of the Playlist, once the Send OSC cell is selected. '''(E)'''
 
3. Right-click on an empty cell and go to Input/Output, then select Send OSC '''(C)'''
 
4. The Send OSC settings are at the bottom of the Playlist, once the Send OSC cell is selected.
:Set your command by assigning an Address pattern:  (E.g. /mxw/render)
:Set your command by assigning an Address pattern:  (E.g. /mxw/render)
:Set the IP address of the target device under Hostname.
:Set the IP address of the target device under Hostname.
:Set the port you want to use to communicate with the target device under Port.
:Set the port you want to use to communicate with the target device under Port.
:You can add multiple values to the message, Float, Int and String values can be sent.
:You can add multiple values to the message, Float, Int and String values can be sent.  
   
   
5. The Send OSC IO Command can be activated by the playlist play as any other playlist items.
5. The Send OSC IO Command can be activated by the playlist play as any other playlist item.
 
See also:<br>
http://download.mxwendler.net/osc/osc_reference.pdf<br>
[[Tutorial Controlling MXWendler via TouchOSC]]


[[File:sendosc.png|728px]]
[[File:sendosc.png|728px]]

Latest revision as of 15:23, 25 March 2020

This tutorial applies to all different OS and MXWendler versions 6.0 and above.

Introduction

In this tutorial we are going to send an OSC Command to another device through the playlist.

Steps

1. Enable the OSC send from the Settings:

Settings → Input and Output → OSC (A)
Check Send OSC. (B).
Set the right IP adress and port of the receiving device and confirm by clicking OK. (C)

2. Go to Playlist.

3. Right-click on an empty cell and go to Input/Output, then select Send OSC (D)

4. The Send OSC settings are at the bottom of the Playlist, once the Send OSC cell is selected. (E)

Set your command by assigning an Address pattern: (E.g. /mxw/render)
Set the IP address of the target device under Hostname.
Set the port you want to use to communicate with the target device under Port.
You can add multiple values to the message, Float, Int and String values can be sent.

5. The Send OSC IO Command can be activated by the playlist play as any other playlist item.

Retrieved from "https://wiki.mxwendler.net/index.php?title=Tutorial_Playlists_with_OSC_Command&oldid=5066"