Difference between revisions of "Tutorial Playlists with OSC Command"

From MXWendler Wiki
Jump to: navigation, search
Line 1: Line 1:
 
In this tutorial we are going to send an OSC Command to another device trough the playlist.
 
In this tutorial we are going to send an OSC Command to another device trough the playlist.
  
1. Enable the OSC send:  
+
1. Enable the OSC send from the Settings:  
 
:'''Settings → Input and Output → OSC''' '''(A)''', check Send OSC  '''(B)'''.  
 
:'''Settings → Input and Output → OSC''' '''(A)''', check Send OSC  '''(B)'''.  
:Set the right IP adress and port of the receiving device and confirm by clicking ok on the bottom of the settings page.  
+
:Set the right IP adress and port of the receiving device and confirm by clicking OK.  
 +
2. Go to Playlist '''(C)'''
  
2. Go to Playlist '''(B)'''
+
3. Right-click on an empty cell and go to Input/Output, then select Send OSC '''(D)'''
  
3. Right-click on an empty cell and go to Input/Output, then select Send OSC '''(C)'''
+
4. The Send OSC settings are at the bottom of the Playlist, once the Send OSC cell is selected. '''(E)'''
 
 
4. The Send OSC settings are at the bottom of the Playlist, once the Send OSC cell is selected.
 
 
:Set your command by assigning an Address pattern:  (E.g. /mxw/render)
 
:Set your command by assigning an Address pattern:  (E.g. /mxw/render)
 
:Set the IP address of the target device under Hostname.
 
:Set the IP address of the target device under Hostname.
 
:Set the port you want to use to communicate with the target device under Port.
 
:Set the port you want to use to communicate with the target device under Port.
:You can add multiple values to the message, Float, Int and String values can be sent.
+
:You can add multiple values to the message, Float, Int and String values can be sent.  
 
   
 
   
5. The Send OSC IO Command can be activated by the playlist play as any other playlist items.
+
5. The Send OSC IO Command can be activated by the playlist play as any other playlist item.
  
 
See also:<br>
 
See also:<br>

Revision as of 11:48, 29 January 2020

In this tutorial we are going to send an OSC Command to another device trough the playlist.

1. Enable the OSC send from the Settings:

Settings → Input and Output → OSC (A), check Send OSC (B).
Set the right IP adress and port of the receiving device and confirm by clicking OK.

2. Go to Playlist (C)

3. Right-click on an empty cell and go to Input/Output, then select Send OSC (D)

4. The Send OSC settings are at the bottom of the Playlist, once the Send OSC cell is selected. (E)

Set your command by assigning an Address pattern: (E.g. /mxw/render)
Set the IP address of the target device under Hostname.
Set the port you want to use to communicate with the target device under Port.
You can add multiple values to the message, Float, Int and String values can be sent.

5. The Send OSC IO Command can be activated by the playlist play as any other playlist item.

See also:
http://download.mxwendler.net/osc/osc_reference.pdf
Tutorial Controlling MXWendler via TouchOSC

Sendosc.png