Difference between revisions of "Tutorial Playlists with PJlink Command"

From MXWendler Wiki
Jump to: navigation, search
(Created page with "In this tutorial we will turn on a projector using the PJlink Command in playlist. 1. Go to Playlist '''(A)''' 2. Right-click on an empty cell 3. On the context menu select...")
 
 
Line 5: Line 5:
 
2. Right-click on an empty cell
 
2. Right-click on an empty cell
  
3. On the context menu select IO Commands then select PJlink Command '''(B)'''
+
3. On the context menu select Input/Output then select PJlink Command '''(B)'''
  
 
4. Click on the PJLink Command cell, the settings will be opened under the playlist. '''(C)'''
 
4. Click on the PJLink Command cell, the settings will be opened under the playlist. '''(C)'''

Latest revision as of 16:40, 15 January 2020

In this tutorial we will turn on a projector using the PJlink Command in playlist.

1. Go to Playlist (A)

2. Right-click on an empty cell

3. On the context menu select Input/Output then select PJlink Command (B)

4. Click on the PJLink Command cell, the settings will be opened under the playlist. (C)

5. In the settings tab:

  • set the command on Power on (Video on/off, controls the shutter of the projector),
  • uncheck the dry run box so your action will take effect, (D)
  • set the password to access the projectors (the default PJLink password can be usually found in the user manual of the projector and changed by the user),
  • set the IP address to every projector connected to the network that you want to control.

6. Play the Playlist to send the PJlink Command to the projectors.

728px