Tutorial Playlists with PJlink Command: Difference between revisions

From MXWendler Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 1: Line 1:
This tutorial applies to all different OS and MXWendler versions 6.0 and above.
<div class="noprint">
== Introduction==
</div>
In this tutorial, we will turn a projector on using the PJlink Command in playlist.
In this tutorial, we will turn a projector on using the PJlink Command in playlist.
 
<div class="noprint">
==Steps==
</div>
1. Go to Playlist. '''(A)'''
1. Go to Playlist. '''(A)'''



Latest revision as of 14:26, 25 March 2020

This tutorial applies to all different OS and MXWendler versions 6.0 and above.

Introduction

In this tutorial, we will turn a projector on using the PJlink Command in playlist.

Steps

1. Go to Playlist. (A)

2. Right-click on an empty cell and select PJLink Command from the Context Menu.

Context Menu → Input/Output → PJLink Command (B)

3. Click on the PJLink Command cell, the settings will be opened under the playlist.

4. In the settings tab: (C)

  • set the command on Power on (Video on/off, controls the shutter of the projector),
  • uncheck the dry run box so your action will take effect,
  • set the password to access the projectors (the default PJLink password can be usually found in the user manual of the projector and can changed by the user),
  • set the IP address to every projector connected to the network that you want to control.

6. Play the Playlist to send the PJlink Command to the projectors.