Difference between revisions of "Tutorial Playlists with PJlink Command"

From MXWendler Wiki
Jump to: navigation, search
Line 3: Line 3:
 
1. Go to Playlist '''(A)'''
 
1. Go to Playlist '''(A)'''
  
2. Right-click on an empty cell
+
2. Right-click on an empty cell and select PJLink Command from the Context Menu.
 +
:'''Context Menu → Input/Output → PJLink Command''' '''(B)'''
 +
3. Click on the PJLink Command cell, the settings will be opened under the playlist. '''(C)'''
  
3. On the context menu select Input/Output then select PJlink Command '''(B)'''
+
4. In the settings tab:  
 
+
*set the command on Power on (Video on/off, controls the shutter of the projector),  
4. Click on the PJLink Command cell, the settings will be opened under the playlist. '''(C)'''
+
*uncheck the dry run box so your action will take effect, '''(D)'''
 
+
*set the password to access the projectors (the default PJLink password can be usually found in the user manual of the projector and can changed by the user),
5. In the settings tab:  
+
*set the IP address to every projector connected to the network that you want to control.
* set the command on Power on (Video on/off, controls the shutter of the projector),  
 
* uncheck the dry run box so your action will take effect, '''(D)'''
 
* set the password to access the projectors (the default PJLink password can be usually found in the user manual of the projector and changed by the user),
 
* set the IP address to every projector connected to the network that you want to control.
 
 
   
 
   
 
6. Play the Playlist to send the PJlink Command to the projectors.
 
6. Play the Playlist to send the PJlink Command to the projectors.
  
 
[[File:pjlink.png|728px]]
 
[[File:pjlink.png|728px]]

Revision as of 11:43, 29 January 2020

In this tutorial we will turn on a projector using the PJlink Command in playlist.

1. Go to Playlist (A)

2. Right-click on an empty cell and select PJLink Command from the Context Menu.

Context Menu → Input/Output → PJLink Command (B)

3. Click on the PJLink Command cell, the settings will be opened under the playlist. (C)

4. In the settings tab:

  • set the command on Power on (Video on/off, controls the shutter of the projector),
  • uncheck the dry run box so your action will take effect, (D)
  • set the password to access the projectors (the default PJLink password can be usually found in the user manual of the projector and can changed by the user),
  • set the IP address to every projector connected to the network that you want to control.

6. Play the Playlist to send the PJlink Command to the projectors.

Pjlink.png