Difference between revisions of "Tutorial Playlists with PJlink Command"

From MXWendler Wiki
Jump to: navigation, search
Line 1: Line 1:
In this tutorial we will turn on a projector using the PJlink Command in playlist.
+
In this tutorial, we will turn a projector on using the PJlink Command in playlist.
  
 
1. Go to Playlist '''(A)'''
 
1. Go to Playlist '''(A)'''

Revision as of 16:48, 29 January 2020

In this tutorial, we will turn a projector on using the PJlink Command in playlist.

1. Go to Playlist (A)

2. Right-click on an empty cell and select PJLink Command from the Context Menu.

Context Menu → Input/Output → PJLink Command (B)

3. Click on the PJLink Command cell, the settings will be opened under the playlist. (C)

4. In the settings tab:

  • set the command on Power on (Video on/off, controls the shutter of the projector),
  • uncheck the dry run box so your action will take effect, (D)
  • set the password to access the projectors (the default PJLink password can be usually found in the user manual of the projector and can changed by the user),
  • set the IP address to every projector connected to the network that you want to control.

6. Play the Playlist to send the PJlink Command to the projectors.

Pjlink.png