Tutorial Playlists with Timecode

From MXWendler Wiki
Revision as of 10:33, 25 March 2020 by Behrooz (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This tutorial applies to all different OS and MXWendler versions.

Introduction

You can adapt the playlist to listen to timecode. To make MXWendler listen to a timecode, you must first activate MTC Listening first (A):

Setting up the Timecode

1. Enable a Midi Device:

Settings → IO → Midi General → Devices → restart

2. Enable MTC Listening:

Settings → IO → Midi General → MTC → restart (Sync Time to MTC is not required for this function)

{{#mpdftags: pagebreak}}


MXWendler now receives MTC timecode. To use the timecode in the playlist, you must enter the timecodes in the playlist.

1. Open the Playlist Tab.
2. Double-click on the left-most column, the 'Comment Column'.
3. Enter a timecode such as 00:00:00:01 (hh:mm:ss:frame). (B)

The playlist now responds to MTC. Follow these rules when using MTC:

You do not have to enter MTC in each playlist row
You can freely mix timecodes, meaning that earlier times can appear later in the playlist