View source for Tutorial Reseting Runtime Counter with IO Commands in Playlist

This tutorial applies to all different OS and MXWendler versions. Please note that the screenshots are made with Version 5 User Interface. Version 6 users please consider the differences in Version 6 [[Playlist]].
<div class="noprint">
== Introduction==
</div>
In this tutorial, we'll reset the Runtime Counter at the end of a playlist using IO Commands.

==IO Mapping==

1. Go to '''Settings &rarr; Input and Output - Keyboard,MIDI,DMX &rarr; DMX/MIDI/Keyboard Events''' '''(A)'''

2. From the drop-down menu of Events select Keyboard. '''(B)'''

3. Click 'Add(+)' and then click 'Learn' and press a key on the keyboard (e.g. 'A'). '''(C)'''

4. From the drop-down menu of Receiver select '/mxw/render/runtime'. '''(D)'''

5. From the drop-down menu of Type select 'Go To'. '''(E)'''

6. Set the time to 0 and the Value to 0. '''(F)'''

7. Click Apply and Ok.


[[File:46.png|728px]]
{{#mpdftags: pagebreak}}
==Triggering in Playlist==

1. Go to Preload Tab and load a number of videos to Preload. 

2. Go to Playlist Tab and create a playlist from the videos in Preload. '''(A)'''

3. Right-click on the cell after the last video in your playlist and select 'IO Command' and 'Send IO Command'. '''(B)'''

4. Click on the cell where the IO Command is and in the edit box down, double-click on the empty box and write down 'Keyboard a'. '''(C)'''

5. Play through the Playlist. When you play the IO Command, the keyboard 'a' would be triggered causing the Runtime Counter to restart.


[[File:47.png|728px]]