Tutorial Resetting Runtime Counter with IO Commands in Playlist: Difference between revisions
Jump to navigation
Jump to search
(Created page with "In this tutorial we'll reset the Runtime Counter at the end of a playlist using IO Commands. '''IO Mapping''' :*'''A'''Go to Settings // Input and Output - Keboard,MIDI,DMX...") |
No edit summary |
||
Line 4: | Line 4: | ||
'''IO Mapping''' | '''IO Mapping''' | ||
:*'''A'''Go to Settings // Input and Output - Keboard,MIDI,DMX // DMX/MIDI/Keyboard Events tab | :*'''A''' Go to Settings // Input and Output - Keboard,MIDI,DMX // DMX/MIDI/Keyboard Events tab | ||
:*'''B'''From the drop-down menu of Events select Keyboard | :*'''B''' From the drop-down menu of Events select Keyboard | ||
:*'''C'''Click Add(+) and then click Learn and press a key on keyboard (e.g. A) | :*'''C''' Click Add(+) and then click Learn and press a key on keyboard (e.g. A) | ||
:*'''D'''From the drop-down menu of Receiver select /mxw/render/runtime | :*'''D''' From the drop-down menu of Receiver select /mxw/render/runtime | ||
:*'''E'''From the drop-down menu of Type select Go To | :*'''E''' From the drop-down menu of Type select Go To | ||
:*'''F'''Set the time to 0 and the Value to 0 | :*'''F''' Set the time to 0 and the Value to 0 | ||
:*'''G'''Click Apply and Ok | :*'''G''' Click Apply and Ok | ||
Revision as of 16:15, 18 February 2019
In this tutorial we'll reset the Runtime Counter at the end of a playlist using IO Commands.
IO Mapping
- A Go to Settings // Input and Output - Keboard,MIDI,DMX // DMX/MIDI/Keyboard Events tab
- B From the drop-down menu of Events select Keyboard
- C Click Add(+) and then click Learn and press a key on keyboard (e.g. A)
- D From the drop-down menu of Receiver select /mxw/render/runtime
- E From the drop-down menu of Type select Go To
- F Set the time to 0 and the Value to 0
- G Click Apply and Ok
Playlist
- Go to Preload Tab and load a number of videos to Prelaod
- Go to Playlist Tab and create a playlist from the videos in Preload
- Right click on the cell after the last video in your playlist and select IO Command and Send IO Command
- Click on the Cell where the IO Command is and in the edit box down double click on the empty box and write down Keyboard a
- Play through the Playlist. When you play the IO Command the keyboad a would be triggered causing the Runtime Counter to restart