Tutorial Resetting Runtime Counter with IO Commands in Playlist

From MXWendler Wiki
Revision as of 15:52, 18 February 2019 by Behrooz (talk | contribs)
Jump to navigation Jump to search

In this tutorial we'll reset the Runtime Counter at the end of a playlist using IO Commands.


IO Mapping

  • A Go to Settings // Input and Output - Keboard,MIDI,DMX // DMX/MIDI/Keyboard Events tab
  • B From the drop-down menu of Events select Keyboard
  • C Click Add(+) and then click Learn and press a key on keyboard (e.g. A)
  • D From the drop-down menu of Receiver select /mxw/render/runtime
  • E From the drop-down menu of Type select Go To
  • F Set the time to 0 and the Value to 0
  • Click Apply and Ok



Playlist

  • Go to Preload Tab and load a number of videos to Prelaod
  • A Go to Playlist Tab and create a playlist from the videos in Preload
  • B Right click on the cell after the last video in your playlist and select IO Command and Send IO Command
  • CClick on the Cell where the IO Command is and in the edit box down double click on the empty box and write down Keyboard a
  • Play through the Playlist. When you play the IO Command the keyboad a would be triggered causing the Runtime Counter to restart