Tutorial Resetting Runtime Counter with IO Commands in Playlist

From MXWendler Wiki
Revision as of 11:11, 15 May 2019 by Behrooz (talk | contribs)
Jump to navigation Jump to search

In this tutorial we'll reset the Runtime Counter at the end of a playlist using IO Commands.


IO Mapping

1. Go to Settings // Input and Output - Keboard,MIDI,DMX // DMX/MIDI/Keyboard Events tab (A)

2. From the drop-down menu of Events select Keyboard (B)

3. Click Add(+) and then click Learn and press a key on keyboard (e.g. A) (C)

4. From the drop-down menu of Receiver select /mxw/render/runtime (D)

5. From the drop-down menu of Type select Go To (E)

6. Set the time to 0 and the Value to 0 (F)

7. Click Apply and Ok


{{#mpdftags: pagebreak}}


Playlist

1. Go to Preload Tab and load a number of videos to Prelaod

2. Go to Playlist Tab and create a playlist from the videos in Preload (A)

3. Right click on the cell after the last video in your playlist and select IO Command and Send IO Command (B)

4. Click on the Cell where the IO Command is and in the edit box down double click on the empty box and write down Keyboard a (C)

5. Play through the Playlist. When you play the IO Command the keyboad a would be triggered causing the Runtime Counter to restart