Tutorial Sending and Receiving Multiple Video Streams with NDI

From MXWendler Wiki
Revision as of 17:45, 22 January 2020 by Behrooz (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

In this tutorial, we'll send and receive multiple streams of Video from and to MXWendler using NDI.

Settings in MXWendler for the Sender

To be able to use MXWendler as an NDI source:
1. Go to NDI settings and activate Start NDI Server.

Settings → Media-Clips,Live,Virtual → Streaming → NDI (A)

2. From the drop-down list, select and add which source of video should be streamed out. You can also type the source you wish to: (B)

e.g for the video on the fourth Layer of the Track 2, write /mxw/track/2/layer/4

3. Start and Register MXWendler Virtual Capture... must be activated (C)

4. Restart MXWendler.

In theory, you can stream more than 60 video sources out from MXWendler. These streams can be received through NDI Tools, by any other PC which is on the same Ethernet network. You can monitor these streamed outputs via the Studio Monitor application which is included in the NDI Tools package.

Settings on the Receiver System