Tutorial Time-sync and sending IO Commands over OSC Protocol: Difference between revisions
No edit summary |
|||
Line 38: | Line 38: | ||
Set a playlist on both the computers | |||
Create an event on the slave computer to control the playlist's play button, for example with the right arrow key | |||
: eg. '''Menu - Settings - IO - DMX/MIDI/Keyboard Events - Keyboard''' | : eg. '''Menu - Settings - IO - DMX/MIDI/Keyboard Events - Keyboard''' | ||
Line 47: | Line 47: | ||
Set an IO Command in the Master system's playlist | |||
: Right click on the first cell of the second cue, select "Send IO Command" and then double click to write the command: "Keyboard (right)" | : Right click on the first cell of the second cue, select "Send IO Command" and then double click to write the command: "Keyboard (right)" |
Revision as of 14:13, 18 March 2019
In this tutorial we will sync two MXWendler systems and simultaneously control the playlist of both the computers by sending IO commands over OSC protocol.
{{#mpdftags: pagebreak}}
Pooling MXWendler systems via time synchronization
Setting the network:
- To communicate over the OSC protocol, the machines have to be connected to the same network.
- The time signal will go from the computer with the lower IP (Master) to the computer with the higher (Slave).
- In our case the Master has the 192.168.4.32 IP address and the Slave has the 192.168.4.91.
{{#mpdftags: pagebreak}} Setting the software on both the computers:
- Start MXWendler and go to:
- Menu - Settings - IO - OSC
- (A) Check Receive OSC
- (B) Set port to 7000
- (C) Check Log received data (this allows the Log Window to display the data stream that the computer is receiving)
- (D) Check Broadcast and receive time and Forward IO Events
Now all the machines will send their time until they start to receive packets from a machine with lower IP, then the ones with an higher IP will switch to receiving
- Open the Log Windows of the two computers: the flow of time commands should be displayed on the Slave system.
The 2 MXWendler systems are now connected and synchronized {{#mpdftags: pagebreak}}
{{#mpdftags: pagebreak}}
Simultaneous control of 2 playlists with IO Commands via OSC
Set a playlist on both the computers
Create an event on the slave computer to control the playlist's play button, for example with the right arrow key
- eg. Menu - Settings - IO - DMX/MIDI/Keyboard Events - Keyboard
Set an IO Command in the Master system's playlist
- Right click on the first cell of the second cue, select "Send IO Command" and then double click to write the command: "Keyboard (right)"
Now, by pressing the play button on the Master computer, the playlist will be simultaneously executed on the Slave