Difference between revisions of "Tutorial Using the Akai APC Mini (Note On/Off)"

From MXWendler Wiki
Jump to: navigation, search
 
(35 intermediate revisions by 4 users not shown)
Line 1: Line 1:
In this tutorial preload clips are triggered over an Akai APC Mini Controller. Furthermore tracks, layers, effect parameters and the master opacity can be controlled over the sliders.
+
This tutorial applies to Windows only, and all MXWendler versions.
 +
<div class="noprint">
 +
== Introduction==
 +
</div>
 +
In this tutorial preload clips are triggered over an Akai APC Mini Controller. Tracks, layers, effect parameters, and the master opacity can be controlled over the sliders.
  
:1. Install MIDIYoke (MidiYokeSetup.msi needs to be installed in Windows XP compatibility mode!).
+
The second chapter explains how to light up the Akai APC Mini Keyboard.
  
:2. Install MIDI-OX.
+
== Using the Akai APC Mini  ==
  
:3. Connect Akai APC Mini to your computer.
+
Please download first the necessary [http://www.mxwendler.net/products/downloads.html  APC Mini Midi Skin].
 
:4. Open MIDI-OX.
 
  
:5. Select 'MIDIYoke 1' as Output and 'APC Mini' as Input:
+
1. Install MIDIYoke (MidiYokeSetup.msi needs to be installed in Windows XP compatibility mode!).
::'''Options → MIDI Devices → Output = 'MIDIYoke 1' → Input = 'APC Mini''''
 
  
:6. Select 'apcmini_mxw_datamap_full.oxm' as datamap:
+
2. Install MIDI-OX.
::'''Options → Data Mapping → new window → Load: apcmini_mxw_datamap_full.oxm''' 
 
The window should now be filled with data. This file needs to be loaded only once.
 
The next time you run MIDI-OX it will be loaded automatically.
 
  
'''Important:'''
+
3. Connect the Akai APC Mini to your computer.
• '''Enable TURN MAP ON and confirm it with OK.'''
 
• '''MIDI-OX must be active in the background while working with the AKAI APC Mini!'''
 
'''MIDI-OX converts the ''Note-On Data'' of the Akai APC Mini into ''Control Change'', which'''
 
'''MXWendler can process.'''
 
  
 +
4. Open MIDI-OX.
  
 +
5. Select 'MIDIYoke 1' as Output and 'APC Mini' as Input:
 +
:'''Options → MIDI Devices → Output = 'MIDIYoke 1' → Input = 'APC Mini''''
 +
{{#mpdftags: pagebreak}}
 +
6. Select 'apcmini_mxw_datamap_full.oxm' as datamap:
 +
:'''Options → Data Mapping → new window → Load: apcmini_mxw_datamap_full.oxm''' 
  
:7. Open MXWendler.
+
The window should now be filled with data. This file needs to be loaded only once.
 +
The next time you run MIDI-OX it will be loaded automatically.
  
:8. Select 'MIDI' in the IO Settings:
+
'''Important:''' <br>
::'''Settings → IO Devices → DMX/MIDI/Keyboard Events → MIDI'''  
+
*Enable TURN MAP ON and confirm it with OK.  
 +
*MIDI-OX must be active in the background while working with the Akai APC Mini!
 +
*MIDI-OX converts the '''Note-On Data''' of the Akai APC Mini into '''Control Change''', which MXWendler can process.
 +
7. Open MXWendler.
  
:9. Load the file '''Wendler_standard_APCmini.midimappings'''.
+
8. Select 'MIDI' in the IO Settings:
 +
:'''Settings → IO Devices → DMX/MIDI/Keyboard Events → MIDI'''
 +
9. Load the file '''Wendler_standard_APCmini.midimappings'''.
  
:10. Click on 'Apply', confirm it with 'OK' and 'Yes'.
+
10. Click on 'Apply', confirm it with 'OK' and 'Yes'.
 +
{{#mpdftags: pagebreak}}
 +
11. Select 'In From MIDI Yoke 1' under MIDI/Generators:
 +
:'''Settings → IO Devices → MIDI/Generators → In From MIDI Yoke 1'''
 +
12. Confirm it with 'OK'.
  
:11. Select 'In From MIDI Yoke 1' under MIDI/Generators:
+
13. Set the Preload to 8 rows and 8 columns. (Thereby the Preload Tab corresponds to the optic of the Akai APC Mini.)
::'''Settings → IO Devices MIDI/Generators In From MIDI Yoke 1'''
+
:'''Settings → Windows Preload/Playlist → Default preload cols = 8 Default preload rows = 8'''
 +
14. Restart MXWendler.
  
:12. Confirm it with 'OK'.
+
Each of the 64 Akai APC Mini buttons will now trigger a Preload Clip ''once'' in MXWendler.
  
:13. Set the Preload to 8 rows and 8 columns. (Thereby the Preload Tab corresponds to the optic of the AKAI APC Mini.)
+
The round buttons on the side are already programmed in MIDI-OX and can be seized by choice.
 +
*Slider 1,2,3 = Track 1,2,3
 +
*Slider 4,5,6 = Layer 1,2,3 (on the active track)
 +
*Slider 7,8 = Free, can be seized by choice (e.g. effect values)
 +
*Slider 9 = Master Opacity
  
:14. Restart MXWendler.
 
  
 +
[[File:AkaiADCmini.png|728px]]
  
 +
== Light up the Akai APC Mini keyboard  ==
  
Each of the 64 Akai APC Mini buttons will now trigger a Preload Clip ''once'' in MXWendler.
+
1. Open MIDI-OX.
 
 
The round buttons on the side are already programmed in MIDI-OX and can be seized by choice.
 
 
 
:• Slider 1,2,3 = Track 1,2,3
 
  
:• Slider 4,5,6 = Layer 1,2,3 (on the active track)
+
2. Select 'Data Mapping' in the Options.
 +
:'''Options → Data Mapping''' 
 +
3. Uncheck 'Turn Map On' and confirm with 'OK'.
  
:• Slider 7,8 = free, can be seized by choice (e.g. effect values)
+
4. Change the Output from 'MIDIYoke 1' to 'APC Mini' and confirm with 'OK'.
 +
:'''Options → MIDI Devices → Output = 'APC Mini' ''''
 +
5. Press all the keys you want to be lit up.
  
:• Slider 9 = Master Opacity
+
6. Change the Output again. This time from 'APC Mini' to 'MIDIYoke 1' and confirm with 'OK'.
 +
:'''Options → MIDI Devices → Output = 'MIDIYoke 1' ''''
 +
7. Activate 'Turn Map On' and confirm with 'OK'.
 +
:'''Options → Data Mapping → 'Turn Map On' '''
 +
{{#mpdftags: pagebreak}}

Latest revision as of 15:53, 25 March 2020

This tutorial applies to Windows only, and all MXWendler versions.

Introduction

In this tutorial preload clips are triggered over an Akai APC Mini Controller. Tracks, layers, effect parameters, and the master opacity can be controlled over the sliders.

The second chapter explains how to light up the Akai APC Mini Keyboard.

Using the Akai APC Mini

Please download first the necessary APC Mini Midi Skin.

1. Install MIDIYoke (MidiYokeSetup.msi needs to be installed in Windows XP compatibility mode!).

2. Install MIDI-OX.

3. Connect the Akai APC Mini to your computer.

4. Open MIDI-OX.

5. Select 'MIDIYoke 1' as Output and 'APC Mini' as Input:

Options → MIDI Devices → Output = 'MIDIYoke 1' → Input = 'APC Mini'

6. Select 'apcmini_mxw_datamap_full.oxm' as datamap:

Options → Data Mapping → new window → Load: apcmini_mxw_datamap_full.oxm

The window should now be filled with data. This file needs to be loaded only once. The next time you run MIDI-OX it will be loaded automatically.

Important:

  • Enable TURN MAP ON and confirm it with OK.
  • MIDI-OX must be active in the background while working with the Akai APC Mini!
  • MIDI-OX converts the Note-On Data of the Akai APC Mini into Control Change, which MXWendler can process.

7. Open MXWendler.

8. Select 'MIDI' in the IO Settings:

Settings → IO Devices → DMX/MIDI/Keyboard Events → MIDI

9. Load the file Wendler_standard_APCmini.midimappings.

10. Click on 'Apply', confirm it with 'OK' and 'Yes'.

11. Select 'In From MIDI Yoke 1' under MIDI/Generators:

Settings → IO Devices → MIDI/Generators → In From MIDI Yoke 1

12. Confirm it with 'OK'.

13. Set the Preload to 8 rows and 8 columns. (Thereby the Preload Tab corresponds to the optic of the Akai APC Mini.)

Settings → Windows → Preload/Playlist → Default preload cols = 8 → Default preload rows = 8

14. Restart MXWendler.

Each of the 64 Akai APC Mini buttons will now trigger a Preload Clip once in MXWendler.

The round buttons on the side are already programmed in MIDI-OX and can be seized by choice.

  • Slider 1,2,3 = Track 1,2,3
  • Slider 4,5,6 = Layer 1,2,3 (on the active track)
  • Slider 7,8 = Free, can be seized by choice (e.g. effect values)
  • Slider 9 = Master Opacity


AkaiADCmini.png

Light up the Akai APC Mini keyboard

1. Open MIDI-OX.

2. Select 'Data Mapping' in the Options.

Options → Data Mapping

3. Uncheck 'Turn Map On' and confirm with 'OK'.

4. Change the Output from 'MIDIYoke 1' to 'APC Mini' and confirm with 'OK'.

Options → MIDI Devices → Output = 'APC Mini' '

5. Press all the keys you want to be lit up.

6. Change the Output again. This time from 'APC Mini' to 'MIDIYoke 1' and confirm with 'OK'.

Options → MIDI Devices → Output = 'MIDIYoke 1' '

7. Activate 'Turn Map On' and confirm with 'OK'.

Options → Data Mapping → 'Turn Map On'