Difference between revisions of "Windows XP + e:cue"

From MXWendler Wiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
'''This applies to Windows 7 and MXWendler version 4.2 and above'''
+
This applies to Windows 7 and MXWendler version 4.2 and above
  
 
'''Problem'''
 
'''Problem'''
  
If you use e:cue programmer 5.2 ( and possibly other versions ) to send dmx data to MXWendler,some values drop to 0.0 every two seconds, or stay at 0.0 for two second and jump to the desired value for a short time.
+
If you use e:cue programmer 5.2 ( and possibly other versions ) to send dmx data to MXWendler, some values drop to 0.0 every two seconds, or stay at 0.0 for two seconds and jump to the desired value for a short time.
  
 
'''Reason'''
 
'''Reason'''
  
e:cue sends wrong values
+
e:cue sends wrong values.
  
 
'''Solution/Workaround'''
 
'''Solution/Workaround'''

Latest revision as of 14:25, 1 October 2019

This applies to Windows 7 and MXWendler version 4.2 and above

Problem

If you use e:cue programmer 5.2 ( and possibly other versions ) to send dmx data to MXWendler, some values drop to 0.0 every two seconds, or stay at 0.0 for two seconds and jump to the desired value for a short time.

Reason

e:cue sends wrong values.

Solution/Workaround

e:cue supports sending up to 4 universes.
If you use different universes, the problem appears, if you use the same universe 4 times the problem disappears.