Time and Event Sync all PCs: Difference between revisions
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
:Does your router/switch allow broadcasting? | :Does your router/switch allow broadcasting? | ||
:Are the firewalls turned off? | :Are the firewalls turned off? | ||
:Does the admin account have a password ( Windows 7) | :Does the admin account have a password ( Windows 7)? | ||
'''Solution''' | '''Solution''' | ||
1. Turn on osc receiving for '''every''' machine on port 7000 | 1. Turn on osc receiving for '''every''' machine on port 7000. | ||
2. Create a simple osc testing application with eg. pd and send some commands to *any machine* from *any machine* | 2. Create a simple osc testing application with eg. pd and send some commands to *any machine* from *any machine*. | ||
3. Turn on ''Broadcast and receive time'' for '''every''' machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving. | 3. Turn on ''Broadcast and receive time'' for '''every''' machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving. | ||
4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP ) | 4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP ). | ||
5. Broadcast to the ports where the machines are listening ( 7000 ) | 5. Broadcast to the ports where the machines are listening ( 7000 ). | ||
Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 ) | Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 ). | ||
Revision as of 13:19, 5 June 2019
This applies to MXWendler version 4.2 and above
Task
Pooling MXWendler systems via time synchronisation
Tests to do before starting MXWendler
- Can you ping all the computers from one host?
- Can you ping back?
- Does your router/switch allow broadcasting?
- Are the firewalls turned off?
- Does the admin account have a password ( Windows 7)?
Solution
1. Turn on osc receiving for every machine on port 7000.
2. Create a simple osc testing application with eg. pd and send some commands to *any machine* from *any machine*.
3. Turn on Broadcast and receive time for every machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving.
4. Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP ).
5. Broadcast to the ports where the machines are listening ( 7000 ).
Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 ).