Tutorial Connecting the grandMA 2Port Node with MXWendler via Art-Net: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
Line 6: | Line 6: | ||
[[File:04 IPConsole.PNG|300px]] | [[File:04 IPConsole.PNG|300px]] | ||
:'''01.''' Open the network adapter settings | :'''01.''' Open the network adapter settings, give system a MA-Net2 IP adress ( here 192.168.4.254 ) | ||
Line 22: | Line 22: | ||
[[File:01 grandmasession.PNG|300px]] | [[File:01 grandmasession.PNG|300px]] | ||
:'''04.''' Open MA Setup, create a new session | :'''04.''' Open MA Setup, create a new session on the MA-Net2 IP ( here 192.168.4.254 ) | ||
[[File:02 grandma2portnode.PNG|300px]] | [[File:02 grandma2portnode.PNG|300px]] | ||
:'''05.''' Open DMX nodes, add the node, set Ma-Net2 mode, set session id that matches the previously created session. | :'''05.''' Open DMX nodes, add the node, assign it a MA-Net2 IP adress ( here 192.168.4.250 ), set Ma-Net2 mode, set session id that matches the previously created session. | ||
Revision as of 17:52, 24 November 2015
In this tutorial we will connect a grandMA onPC software with a grandMA 2Port node. The onPC software will send Art-Net, which which will be used to control a MXWendler mediaserver.
Configure the grandMA onPC PC system
- 01. Open the network adapter settings, give system a MA-Net2 IP adress ( here 192.168.4.254 )
- 02. Open 'Erweitert...' / 'Extended...'
- 03. Add a second IP adress in the Art-Net range. The netmask of 255.0.0.0 is important.
Configure the grandMA onPC software
- 04. Open MA Setup, create a new session on the MA-Net2 IP ( here 192.168.4.254 )
- 05. Open DMX nodes, add the node, assign it a MA-Net2 IP adress ( here 192.168.4.250 ), set Ma-Net2 mode, set session id that matches the previously created session.
- 06. Open Network Protocols, enable Art-Net, enable DMX output, set universe and subnet as shown.
Configure the MXWendler Mediaserver PC system
- 07. Open network adapter settings, enter a valid Art-Net IP adress. The subnet mask of 255.0.0.0 is important.
Configure the MXWendler Mediaserver software
- 08. Open Settings → IO → Art-Net/DMX → Select adapter, universe and subnet as shown.