Linux and No Dongle Detection: Difference between revisions

From MXWendler Wiki
Jump to navigation Jump to search
← Older editNewer edit →
Hwendler (talk | contribs)
88 edits
No edit summary
Hwendler (talk | contribs)
88 edits
No edit summary
Line 7: Line 7:
'''Background'''
'''Background'''


Actually a dongle is found, but it cannot be read because of a udev permission issue. The dongle can be read, but no commands like 'Give the dongle serial' can be sent to the dongles.
Actually a dongle is found, but it is not usable because of insufficient udev permissions. Dongle values can be read, but no commands like e.g. 'Respond with dongle serial' can be sent (written) to the dongles.


'''Solution'''
'''Solution'''


For a first test, you can start MXWendler as root. If the dongle is correctly used, then it is a permission issue. Enable the correct permissions for all users the USB dongle. Enable full access to the dongles with the following command sequence issued in a terminal:
For a first test, you can start MXWendler as root. If the dongle is usable now, it is a udev permission issue. Now enable the correct permissions for all users the USB dongle. Enable full access to the dongles with the following command sequence issued in a terminal:


<code>
<code>
Line 25: Line 25:
</code>
</code>


Then restart udev service
Exit vim with <esc>,:,w,q,<enter>. Then restart udev service


<code>
<code>

Revision as of 23:38, 31 May 2024

This applies to Ubuntu and Ubuntu-based Linux versions and all MXWendler versions

Problem

You start with a USB dongle attached but the log states there is no dongle found.

Background

Actually a dongle is found, but it is not usable because of insufficient udev permissions. Dongle values can be read, but no commands like e.g. 'Respond with dongle serial' can be sent (written) to the dongles.

Solution

For a first test, you can start MXWendler as root. If the dongle is usable now, it is a udev permission issue. Now enable the correct permissions for all users the USB dongle. Enable full access to the dongles with the following command sequence issued in a terminal:

$ sudo touch /etc/udev/rules.d/999-ft-mxw.rules

$ sudo vim /etc/udev/rules.d/999-ft-mxw.rules

Enter this line:

SUBSYSTEM=="usb",ATTRS{idVendor}=="096e",MODE="0666"

Exit vim with <esc>,:,w,q,<enter>. Then restart udev service

$ sudo /etc/init.d/udev restart

and re-plug the dongle.

Remark

The dongle values are never changed, this is only possible for the dongle issuer.

Retrieved from "https://wiki.mxwendler.net/index.php?title=Linux_and_No_Dongle_Detection&oldid=6079"