Time and Event Sync all PCs

From MXWendler Wiki
Revision as of 16:48, 18 March 2019 by Behrooz (talk | contribs) (Created page with "'''This applies to MXWendler version 4.2 and above''' ''Task:'' :Pooling MXWendler systems via time synchronisation ''Tests to do before starting MXWendler:'' :Can you pin...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This applies to MXWendler version 4.2 and above

Task:

Pooling MXWendler systems via time synchronisation


Tests to do before starting MXWendler:

Can you ping all the computers from one host?
Can you ping back?
Does your router/switch allow broadcasting?
Are the firewalls turned off?
Does the admin account have a password ( Windows 7)


Solution:

Turn on osc receiving for every machine on port 7000
Create a simple osc testing application with eg. pd and send some commands to *any machine* from *any machine*
Turn on Broadcast and receive time for every machine. all machines will send there time until they receive packet from a machine with lower ip, then they switch to receiving.
Broadcast to the subnet: 192.168.1.255 ( subnet may have different IP )
Broadcast to the ports where the machines are listening ( 7000 )
Important: sometimes Windows 7 does not allow broadcasting, then adress the other machine with its ip directly ( eg. 192.168.1.23 instead of 192.168.1.255 )