Tutorial Connecting the grandMA 2Port Node with MXWendler via Art-Net: Difference between revisions
Line 46: | Line 46: | ||
[[File:07 IPMediaserver.PNG|300px]] | [[File:07 IPMediaserver.PNG|300px]] | ||
7. Open network adapter settings, enter a valid Art-Net IP adress. The subnet mask of 255.0.0.0 is important. | 7. Open network adapter settings, enter a valid Art-Net IP adress. The subnet mask of 255.0.0.0 is important. | ||
== Configure the MXWendler Mediaserver software == | == Configure the MXWendler Mediaserver software == |
Revision as of 18:17, 25 March 2019
To use this feature a Windows operative system is required
In this tutorial we will connect a grandMA onPC software with a grandMA 2Port node. The onPC software will send Art-Net, which which will be used to control a MXWendler mediaserver.
Configure the grandMA onPC PC system
1. Open the network adapter settings, assign interface a primary MA-Net2 IP adress ( here 192.168.4.254 )
2. Open 'Erweitert...' / 'Extended...'
3. Add a secondary interface IP adress in the Art-Net range ( recommended 2.x.x.x ). The netmask of 255.0.0.0 is important.
Configure the grandMA onPC software
4. Open MA Setup, create a new session on the MA-Net2 IP ( here 192.168.4.254 )
5. Open DMX nodes, add the node, assign it a MA-Net2 IP adress ( here 192.168.4.250 ), set Ma-Net2 mode, set session id that matches the previously created session.
6. Open Network Protocols, enable Art-Net, enable DMX output, set universe and subnet as shown.
{{#mpdftags: pagebreak}}
Configure the MXWendler Mediaserver PC system
7. Open network adapter settings, enter a valid Art-Net IP adress. The subnet mask of 255.0.0.0 is important.
Configure the MXWendler Mediaserver software
8. Open Settings → IO → Art-Net/DMX → Select adapter, universe and subnet as shown.