Tutorial Playlists with Timecode

You can adapt the playlist to listen to timecode. To make MXWENDLER listen to a timecode, you must first activate MTC Listening first (a):

1. Enable a Midi Device:

   Settings → IO → Midi General → Devices → restart

2. Enable MTC Listening:

   Settings → IO → Midi General → MTC → restart (Sync Time to MTC is not required for this function)

{{#mpdftags: pagebreak}}

MXWENDLER now receives MTC timecode. To use the timecode in the playlist, you must enter the timecodes in the playlist.

1. Open the Playlist Tab.
2. Double-click on the left-most column, the 'comment column'.
3. Enter a timecode such as 00:00:00:01 (hh:mm:ss:frame).

The playlist now responds to MTC. Follow these rules when using MTC:

1. You do not have to enter MTC in each playlist row
2. You can freely mix timecodes, meaning that earlier times can appear later in the playlist

{{#mpdftags: pagebreak}}